PhotonWeld by LASERMACH / Industrial laser welding
PhotonWeld Master Pro X Series
Three industrial handheld laser welding machine classes. One configurable platform, built around your material, joint geometry and welding process.
Compare the Master Pro X60, X80 and X100 by welding penetration and electrical supply. Each model is available with single-wire or dual-wire feeding, plus Basic or Comfort equipment packages.
Choose your Master Pro X model
Find your machine
All three Master Pro X models are professional industrial systems. Select the model according to the required weld penetration, available electrical supply, material and production conditions. Prices and selectable configurations are shown on each product page.

230 V, single-phase
Master Pro X60
The single-phase model, with industrial welding capacity for suitable professional fabrication, manufacturing and repair work.

380 V, three-phase
Master Pro X80
A higher standard-speed penetration class for industrial applications requiring additional welding capacity.

380 V, three-phase
Master Pro X100
The highest standard-speed penetration class in the X Series for demanding suitable thick-section welding applications.
Master Pro X60 vs X80 vs X100: technical comparison
| Technical characteristic | Master Pro X60 | Master Pro X80 | Master Pro X100 |
|---|---|---|---|
| Carbon steel penetration at standard welding speed | 6 mm | 8 mm | 10 mm |
| Stainless steel penetration at standard welding speed | 6 mm | 8 mm | 10 mm |
| Maximum penetration at reduced welding speed | 7 mm | 9 mm | 12 mm |
| Nominal electrical supply | 230 V, single-phase | 380 V, three-phase | 380 V, three-phase |
| Filler-wire feeding | Single or dual | Single or dual | Single or dual |
| Equipment packages | Basic / Comfort A–C | Basic / Comfort A–C | Basic / Comfort A–C |
| Standard fiber laser cable | 10 m | 10 m | 10 m |
| Alternative armored fiber cable | 15 m / 20 m, quoted on request | 15 m / 20 m, quoted on request | 15 m / 20 m, quoted on request |
| Operating class | Professional industrial | Higher-capacity industrial | Highest X Series penetration class |
| View product and configurations | View X60 product | View X80 product | View X100 product |
Manufacturer-stated welding penetration. Reduced-speed maximum penetration is not equivalent to standard-speed working penetration. Actual results depend on alloy, section geometry, joint preparation, filler, welding parameters and operating conditions. Qualify procedures for the application. Alternative fiber cable availability and compatibility are subject to quotation.
Choose single-wire or dual-wire feeding

Single-wire configuration
One filler wire is delivered to the welding area through the corresponding digital single-wire feeder. This is a straightforward configuration for compatible joining, fabrication and repair procedures.
The Basic package includes the matching single-wire feeder and its specified accessories.

Dual-wire configuration
Two filler wires may be fed simultaneously, providing additional flexibility where joint geometry or the welding procedure calls for greater filler-metal delivery.
Deposition and welding results depend on wire dimensions, feeder settings and weld procedure.
Equipment packages: Basic, Comfort A, B and C
Choose the Basic equipment package or one of three Comfort extensions. All Comfort packages retain the equipment included with the selected single-wire or dual-wire Basic machine; their principal distinction is the included face-shield solution.

Core system and services
Basic package
The welding machine, selected wire feeder, 10 m fiber cable, connection cables, starter consumables, specified protective equipment, one-day training and technical support.
Shipping is charged separately.

OD7 face-shield option
Comfort A package
Basic package plus Comfort accessories and an OD7 face shield for use with appropriate protective goggles.
European shipping included.

Auto-darkening face shield
Comfort B package
Basic package plus Comfort accessories and an auto-darkening laser welding face shield with reflective metal cover.
European shipping included.

Respiratory face-shield option
Comfort C package
Basic package plus Comfort accessories and a respiratory laser welding face shield with high-efficiency filtration.
European shipping included.
Training, installation and laser welding safety
Electrical supply: X60 requires a nominal 230 V single-phase supply; X80 and X100 require nominal 380 V three-phase. Verify the actual machine nameplate, wiring, supply protection and installation documentation before commissioning.
Operator training: One day of training at the PhotonWeld training centre before delivery, for up to four participants, is included with the specified Basic equipment package.
Technical support: Two years of online telephone assistance; one-year manufacturer warranty with an additional year available following qualifying online registration, subject to the applicable terms.
Laser safety: These are Class 4 laser welding systems. Controlled work areas, suitable engineering safeguards, wavelength-appropriate PPE, fume extraction and trained operators are essential.
Installation requirements and final safety provisions must follow the system documentation and a site-specific risk assessment.

Illustrative laser welding safety enclosure. The shown enclosure is not included in the standard machine package; protection must be evaluated for the actual laser and work area.
Master Pro X Series: frequently asked questions
Which Master Pro X model should I choose?
Use the required standard-speed penetration, alloy, joint design and electrical supply as your starting points. X60, X80 and X100 are listed at 6 mm, 8 mm and 10 mm standard-speed carbon- and stainless-steel penetration respectively. Confirm suitability by application.
What changes between X60, X80 and X100?
The key documented differences are welding penetration class and power supply: X60 is 230 V single-phase; X80 and X100 are 380 V three-phase. All three offer single-wire or dual-wire feeding and Basic or Comfort packages.
Can I order a dual-wire machine with any Comfort package?
Yes. All three models offer single-wire and dual-wire configurations with Basic, Comfort A, Comfort B or Comfort C. Accessories supplied with the feeder are matched to that selection.
Are penetration values guaranteed for every material?
No. The listed performance is manufacturer-stated and depends on the metal grade, alloy, thickness, joint preparation, welding parameters and speed. The reduced-speed maximum is not the same as standard-speed working penetration.
What comes with the Comfort packages?
Comfort options add graphite-lined feeding tubes, an inspection microscope, additional consumables, suitable roller sets, protective eyewear, six years of software updates and the selected face-shield solution. Comfort A, B and C include shipping in Europe.
Can I request non-standard accessories or technical advice?
Yes. Alternative 15 m and 20 m fiber laser cables and certain wire-feeding rollers are available subject to compatibility, availability and separate quotation. Provide your alloy, section thickness, joint geometry and required filler-wire arrangement when enquiring.
Technical selection assistance
Need help selecting your Master Pro X?
Tell us your material and alloy, thickness, weld joint geometry, available electrical supply and wire-feeding requirements. Our team can help you identify an appropriate configuration and discuss optional equipment.
Request technical adviceFor professional business customers. Prices displayed on individual product pages are in euros and exclude VAT. Suitability of any proposed application must be verified.




